* \brief Disable PLLA clock. */

* \brief Disable PLLB clock. */

* \brief Set the source of the MCK. * * \param ul_source Source selection value. */

* \brief Switch master clock source selection to main clock. * * \param ul_pres Processor clock prescaler. * * \retval 0 Success. * \retval 1 Tim

* \brief Reset the current configuration of the USB device, * This routines can be called by UDD when a RESET on the USB line occurs. */

* Lock sleep mode for VBus PIO pin change detection */

return 0 if the USB is not configured, or the configuration number selected by the HOST

Query the serial input buffer for any new characters

Called by parent Scan module (or by master node) whenever the available current changes

Resets the state of the UART buffers and state variables

Scan for updates in the master/slave - Interrupts will deal with most input functions - Used to send queries - SyncEvent is sent immediately once the

id is the value the next slave should enumerate as

id is the currently assigned id to the slave

State tracking Read value of both side of quadrature

Clear user signature The user signature should be erased each time a new firmware is flashed This is also a way to determine if the firmware has succe

Pop bytes from ring buffer, just drops them, nothing returned XXX (HaaTa): Does not check if empty, that needs to be validated ahead of time

Determines buffer position (index) after given length To munch the buffer, we need the starting buffer position. This function gives the position afte

Remove all unprocessed data

Write to display register Pages 0-7 normal display Page 8 icon buffer

Read address

Update layer state States: 0x00 - Off 0x01 - Activate 0x02 - On 0x03 - Deactivate

Update led state States: 0x00 - Off 0x01 - Activate 0x02 - On 0x03 - Deactivate

Shows a TriggerType

Must set function pointer first!!

Debug function, used by cli only XXX

Looks up the final scancode in a trigger macro

Starting Animation setup

Animation ID lookup - Does lookup from bottom to top - Set previous element to look for the next one - Set prev to 0 to start from the beginning - Ret

Port State processing loop

Setup

RTT Input buffer available

* * SEGGER_RTT_WriteSkipNoLock * * Function description * Stores a specified number of characters in SEGGER RTT * control block which is

* * SEGGER_SYSVIEW_RecordExitISRToScheduler() * * Function description * Format and send an ISR exit into scheduler event. * * Additi

* * SEGGER_SYSVIEW_RecordSystime() * * Function description * Formats and sends a SystemView Systime containing a single U64 or U32 *

* * SEGGER_SYSVIEW_SendModule() * * Function description * Sends the information of a registered module to the host. * * Parameters

* * SEGGER_SYSVIEW_SendNumModules() * * Function description * Send the number of registered modules to the host. */

* * SEGGER_SYSVIEW_SendTaskList() * * Function description * Send all tasks descriptors to the host. */

Generate SWJ Sequence count: sequence bit count data: pointer to sequence bit data return: none

Signal from the Output Module that the available current has changed current - mA

* \brief Get Core Clock Frequency. */

Retrieves the head of the Transaction buffer

Handle short trigger PHRO/AODO state transitions

Iterate over combo, voting on the key state

UART Input buffer available

UART Send Character to output buffer

UART Send String to output buffer, null terminated

Sets the device into firmware reload mode

USB Get Character from input buffer

USB Data Periodic

USB Data Poll

USB Send Character to output buffer

USB Send String to output buffer, null terminated

USB RawIO buffer available

USB RawIO get buffer XXX Must be a 64 byte buffer

USB RawIO send buffer XXX Must be a 64 byte buffer

USB Module Setup

Soft Chip Reset

* * _WriteNoCheck() * * Function description * Stores a specified number of characters in SEGGER RTT ring buffer * and updates the associ

* @brief C custom defined QADD for M3 and M0 processors */

* @brief C custom defined QSUB for M3 and M0 processors */

* @brief Clips Q63 to Q31 values. */

Makes a copy of the structure values

Returns associated ctype struct from a given size @param size: Integer width of type @return: ctype object

Current cycle count for CPU

Determine if the given block has been cleared This is used by the bootloader to clear out old and possibly incompatible non-volatile data However if t

* \brief Clear the given GPNVM bit. * * \param ul_gpnvm GPNVM bit index. * * \return 0 if successful; otherwise returns an error code. */

* \brief Write a data buffer on flash. * * \note This function works in polling mode, and thus only returns when the * data has been effectively wr

Calculate full length

Retrieve modifier setting using the setting name @param animation: Json representation of the animation setting @param name: