Reset Keyboard

Setup

Retrieves the head of the Transaction buffer

Increments TransactionBuffer head pointer Returns 1 if successful, 0 if buffer empty and cannot increment

Handle long trigger DRO state transitions

Handle long trigger PHRO/AODO state transitions

Determine if long ResultMacro (more than 1 sequence element)

Show TriggerMacroVote

UART Get Character from input buffer

UART Data Periodic

UART Data Poll

UART Module Setup

Packet buffer debug for 6kro/boot mode USB Keyboard codes

Packet buffer debug for Consumer Control codes

Packet buffer debug for nkro USB Keyboard codes

Packet buffer debug for System Control codes

Check if USB is ready Returns 1 if ready, 0 if not

\brief Get Main Stack Pointer This function returns the current value of the Main Stack Pointer (MSP). \return MSP Register v

Print a constant string

* \brief Get ADC interrupt and overrun error status. * * \param p_adc Pointer to an ADC instance. * * \return ADC status structure. */

All callbacks in history. Does not adjust unread callback position.

libkiibohd callback function

Cleanup between tests

Cleanup between tests Capability history needs to be cleared between tests.

Returns the path to the cli interface

* \brief Compute the lock range associated with the given address range. * * \param ul_start Start address of lock range. * \param ul_end End addre

@returns: Copy of object

* \brief Get flash wait state. * * \param p_efc Pointer to an EFC instance. * * \return The number of wait states in cycle (no shift). */

* \brief Initialize the EFC controller. * * \param ul_access_mode 0 for 128-bit, EEFC_FMR_FAM for 64-bit. * \param ul_fws The number of wait states

NVIC - Default ISR

Do lookup on ffunc (Frame Function) @returns: String name of ffunc index

* \brief Erase the entire flash. * * \note Only the flash bank including ul_address will be erased. If there are * two flash banks, we need to call

* \brief Read the flash user signature. * * \param p_data Pointer to a data buffer to store 512 bytes of user signature. * \param ul_size Data buff

Do lookup on frameoption Options are set using each bit @returns: String name of frameoption index

String Functions

Code jump routine

Modify indicator string

Monitors for ResultElem Must satisfy schedule in order to complete. @return: True if found, False if not.

Cleanup monitor for ResultElem @return: True if expected cleanup occured, False if not.

Monitors result state @param state: Value of state to monitor @returns: True if valid, False if not

* \brief Enable PDC transfers (TX and/or RX). * * \note It is forbidden to set both TXTEN and RXTEN for a half duplex * peripheral. * * \param[ou

* \brief Return Transmit Counter Register (TCR) value. * * \param[in] p_pdc Device structure pointer * * \return Transmit Counter Register value.

* \brief Configure PDC for data transmit. * * \param[out] p_pdc Device structure pointer * \param[in] p_packet Pointer to packet inform

Do lookup on pfunc (Pixel Function) @returns: String name of pfunc index

* \brief Read PIO interrupt mask. * * \param p_pio Pointer to a PIO instance. * * \return The interrupt mask value. */

* \brief Read and clear PIO interrupt status. * * \param p_pio Pointer to a PIO instance. * * \return The interrupt status value. */

* \note The SAM3S PLL hardware interprets mul as mul+1. For readability the hardware mul+1 * is hidden in this implementation. Use mul as mul effecti

* \brief Disable the specified peripheral clock. * * \note The ID must NOT be shifted (i.e., 1 << ID_xxx). * * \param ul_id Peripheral ID (ID_xxx)

* \brief Disable UDP (USB) clock. */

* \brief Enable UDP (USB) clock. */

* \brief Return peripheral active status. * * \return the status register value. */

* \brief Return peripheral active status. * * \return the status register value. */

* \brief Disable the external Xtal. * * \param ul_bypass 0 for Xtal, 1 for bypass. */

* \brief Set the wake-up inputs for fast startup mode registers * (event generation). * * \param ul_inputs Wake up inputs to enable. */

* \brief Switch main clock source selection to external Xtal/Bypass. * * \note The function may switch MCK to SCLK if MCK source is MAINCK to avoid

* \brief Switch slow clock source selection to external 32k (Xtal or Bypass). * * \note Switching SCLK back to 32krc is only possible by shutting do

Print a char

Prune read callback history. @param items: Max number of items to prune

* \brief Initialize one PWM channel. * * \param p_pwm Pointer to a PWM instance. * \param p_channel Configurations of the specified PWM channel. *

* \brief Find a prescaler/divisor couple to generate the desired ul_frequency * from ul_mck. * * \param ul_frequency Desired frequency in Hz. * \p

* \brief Initialize the PWM source clock (clock A and clock B). * * \param p_pwm Pointer to a PWM instance. * \param clock_config PWM clock configu

Queues next transmission Returns 1 if successfully queued, 0 if there was nothing to queue

Queues next transmission Returns 1 if successfully queued, 0 if there was nothing to queue

Reset step position

Evaluate tests Iterates over prepared tests @return: Result of the test

Process and monitor action Compares the layer state bit of each action to make sure the action resulted in the opposite reaction.

* \brief Disable SPI interrupts. * * \param p_spi Pointer to an SPI instance. * \param ul_sources Interrupts to be disabled. */

\brief Get one data to a SPI peripheral. * * \param p_spi Base address of the SPI instance. * \return The data byte * */

* \brief Get Peripheral Select mode. * * \param p_spi Pointer to an SPI instance. * * \return 1 for Variable mode, 0 for fixed mode. */

Erase flash if full Only erases flash if erase flag has been set storage_init() must be called first Returns: 0 - Erase was not done (invalid status

Returns 1 if storage has been cleared and will not have conflicts when changing the block size Or if there is no useful data in the non-volatile stora

Write storage block data - Buffer to write from address - Starting address to write to size - Number of bytes to write into storage clear - Se